In‐plane shear damage behaviours of 2D needled C/SiC composites

Understanding the in‐plane shear behaviour of composites is essential to establish the design basis for practical applications. This study aims to investigate the shear damage behaviours of 2D needled C/SiC composites by various characterization techniques. The effect of layer arrangement on shear modulus and strength was discussed via shear stress‐strain responses. The shear strain field evolution and uniformity variation were studied by digital image correlation. It shows that the uniformity of shear strain field changes with the shear load, and the shear strain field evolution consist of 5 stages. The electrical resistivity measurement results indicate that structural deformation and damage evolution caused the electrical resistivity change. Furthermore, the damage evolution has a double effect on the electrical resistivity variation. The acoustic emission monitoring shows that the shear damage evolution is a 3‐stage nonlinear process before failure. The shear damages were categorized via acoustic characteristics. Besides, the postfailure behaviours were also discussed in this study.     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

Research on slag-resistance of ZrN-SiAlON-SiC-C composite refractory in different atmospheres

The ZrN-SiAlON composite powder was synthesized using low-grade zircon and bauxite by carbothermal reduction nitridation at first and then ZrN-SiAlON-SiC-C composite refractory were fabricated with the ZrN-SiAlON powder, SiC particles, and a small amount of Si powder as raw materials and sucrose as the binder. The slag resistance of these composites in O₂, N₂ and Ar atmosphere was investigated by X-ray diffraction, scanning electron microscopy, and energy dispersion spectra. The results show that the pores in the inside of ZrN-SiAlON-SiC-C composite refractory were enlarged in oxygen atmosphere due to oxidation, which leads to the decrease in slag resistance. In argon atmosphere, blast furnace slag destroyed the sintered body of zircon, corundum, and cristobalite with the formation of CaZrO₃, then infiltrated into and filled the pores inside the refractory to form a dense layer, which hindered the further erosion of the blast furnace slag. In the reducing atmosphere, the interfacial energy of the gas-liquid phases became larger due to the reactions between blast furnace slag liquid and the gas, resulting in a larger wetting angle which prevented the erosion.     

Extended dissipativity-based non-fragile control for multi-area power systems with actuator fault

This paper addresses the issue of reliable load frequency control design of an uncertain multi-area power system with constant time delays and disturbances via non-fragile sampled-data control approach. In particular, the parameter uncertainties are assumed to be randomly occurring which are described by the Bernoulli distributed sequences. By constructing a suitable Lyapunov–Krasovskii functional together with Wirtinger-based inequality, a new set of sufficient conditions in terms of linear matrix inequalities is obtained to ensure the asymptotic stability and extended dissipativity of the multi-area power system not only when all actuators are operational, but also in case of some actuator failures. Finally, simulation results are conducted to validate the effectiveness of the proposed control design technique.     

基于ELM的英语教学质量评价研究

对英语教学质量实施科学化的评价关系到英语教学质量的提升,为减少主观因素的影响,本文提出一种ELM的教学质量评价方法,该种方法将可以在很大程度上提高教学质量评价的精度。对影响英语教学质量的12个指标进行打分,以此作为ELM的输入,同时将英语教学质量的综合得分作为ELM的输出。评价结果表明,基于EIM的英语教学质量评价结果比SVM、BP具有了很大程度的提升,为实施英语教学质量的评价提供了参考。     

高性能三水醋酸钠-尿素-膨胀石墨混合相变材料的制备及其在电地暖中的应用性能

采用尿素调节三水醋酸钠的相变温度到合适范围再添加膨胀石墨来降低过冷度，研制了高性能的三水醋酸钠-尿素-膨胀石墨混合相变材料，并对其在电地暖中的应用性能进行了研究。结果表明，当尿素质量分数为36.5%、膨胀石墨添加量为4%(质量)时，所得混合相变材料的熔化焓高达209.1 J/g，熔点在31.98℃，过冷度仅为2.04℃，热导率为2.349 W/(m·K)，热可靠性良好；将用该混合相变材料制成的相变板安装在实验房的电地暖中时，实验房的热舒适度随着相变材料层厚度的增加而增加，但也带来加热时间和用电量的增加；当相变材料层厚度为10 mm时，电加热温度适宜设置在45℃；在热舒适度相当的条件下，有相变板的实验房与无相变板的参比房相比具有用电量小及电费低的优势。     

液晶显示器用有机高分子材料的老化与评价方法研究

通过对液晶显示器用有机高分子材料的老化机理分析,研究了胶带和胶黏剂分别在材料贮存期间和使用期间的主要应力及其薄弱环节。提出了在有机高分子材料不同的使用阶段相应的老化试验方案和失效评价指标,并给出了相应的试验验证过程,为液晶显示器用有机高分子材料的寿命评估提供了支持。     

Ultrafine porous boron nitride nanofiber-toughened WC composites

Porous fibers are widely used in catalysis chemistry and hydrogen storage but are rarely used in structural ceramics. In this study, spark plasma sintering was used to prepare an ultrafine porous boron nitride nanofiber-toughened WC composite for the first time. The obtained WC-0.05 wt% ultrafine porous boron nitride nanofiber composites exhibited better properties (ie, a 2.3% increase in hardness and a 19.6% increase in fracture toughness) compared to those of the pure WC specimen. The fiber porosity improved the second phase-WC matrix microstructural combination. The described approach is a novel preparation method for the WC composites. Furthermore, a new toughening mechanism, which is based on “pinning and stretching”, was determined. These findings suggest that porous boron nitride fibers can be considered to be second phases for toughening the WC composites.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.